[Mi16-PL] 1991 Mi16 Ph1 USA

Salut!

Je suis de la Pologne et mon nom est Daniel - Merci pour votre aide Darkraphy


Je vais écrire en anglais.
I'm learning your language slowly so be patient;)

Ok, so... I've got 2 405's in my garage..

One of them is simply gold 1.9 GLD Ph1 produced in France and it have my lovely yellow H4 light bulbs..
It has got 280 000 km above, and still more I bought it from my grandfather for 480Euro about 3 years ago.

Second of them is white 1.9 Mi16 US Ph1 produced in Sochaux, France (VIN) I bought it for 150Euro about 3 weeks ago and still repairing (some of body painting, automatic seatbelts aren't working, heating seats too and it had an gas LPG shot/explosion, so MAF sensor is down... (new orginal in Peugeot Dealer/Service cost about 240Euro (1000 PLN))

Mi16:

[Vous devez être inscrit et connecté pour voir ce lien]


And GLD:

[Vous devez être inscrit et connecté pour voir ce lien]



[Edit Gigibi] Topic title edited, according to forum internal rules.

Slt,

Bienvenue parmi nous !!

A+ EWORKS405

Hi and welcome Daniel !

So first, the correct form is the first, the seconds says "I'm with my polonese and my name is Daniel"

It looks like you have a lot of work to do on the mi16, and I think it will be hard to get some needed components because it's an american one

Is the broken MAF sensor a problem for your engine ?

And personally I don't like the steering wheel of the mi16us (I don't really like the european one either )

And the first two links of your mi16's pictures don't work

But your GLD seem in good state could we see the inside of the car please ?
280 000 that's nice, but I'm sure she will still work for kilometers and kilometers

Hi and welcome.


MI16 usa ta jest bardzo rzadko zajmuje.


Aby dostać się do Gld jest exelente stanie.

Thank's a lot

Laquer'll be polished soon, bumpers'll be painted (I've got already colour) (to Mi16)

I bought a new headlight's 'cause old were burnt (reflections). (to Mi16)

And yes only MAF sensor is broken, an engine gets left the air.

About compoments... engine is XU9J4 w/o cat, so any problem (maybe) will be with auto-seatbelts

Personally... I don't like this steering wheel too but it's original not like in GLD (I don't know from where my grandfather get it )

Of course more pics below.

So... interior of GLD:
I know.. driver seat isn't in good condition.

[Vous devez être inscrit et connecté pour voir ce lien]

I clean it up (it was hard to do after previous owner) And all chassis, wings and front bar was covered an measure to conservation of body, new all copper and flexible brake pipes, all new parts of brake (pistons, etc), filters, (...) shock-absorbers and all kind of consume parts front and rear chassis and more..

And another pic of Mi16:

[Vous devez être inscrit et connecté pour voir ce lien] - after
[Vous devez être inscrit et connecté pour voir ce lien] - when I was covering a measure to body conservation
[Vous devez être inscrit et connecté pour voir ce lien] - new air conditioning / air climatisé pipe.
[Vous devez être inscrit et connecté pour voir ce lien] - i like it



speed69: Could You write it on English or French, 'cause you probably use an translator Fr >> Pl and I don't know what You mean in first sentence even is in my own language :P


BTW.. Je tiens à réparer la voiture avant la fin du mois d'août

So first, your steering wheel in the GLD comes from a Peugeot 605 (http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=380133102616&ih=025&category=121253&ssPageName=WDVW&rd=1 for example), but i was talking about the MI16 one :P

For the seats of your GLD you could sure find some better if you want in a breaker's yard, personnally I prefer the velvet one I have in my SR, but you can sure find some that will please you (you can find some in leather in some Mi 16 or maybe in SR or ST), but you should only take from a Phase 1 (Gear 1 ?) because I'm not sure that seats are compatible between the two phases. You can see the differences between the two phases by looking at the trunk. fot the two front seat it's a Torx40 you'll need to use on phase 2 but I think it's the same on phase 1, for the rear seats it's another problem


You've done a lot of work on them ! Nice

Darkraphy a écrit:So first, your steering wheel in the GLD comes from a Peugeot 605 (http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=380133102616&ih=025&category=121253&ssPageName=WDVW&rd=1 for example), but i was talking about the MI16 one :P

I know that You talk 'bout Mi16 and exactly that steering wheel i don't like too but like i said is original

Darkraphy a écrit:For the seats of your GLD you could sure find some better if you want in a breaker's yard, personnally I prefer the velvet one I have in my SR, but you can sure find some that will please you (you can find some in leather in some Mi 16 or maybe in SR or ST), but you should only take from a Phase 1 (Gear 1 ?) because I'm not sure that seats are compatible between the two phases. You can see the differences between the two phases by looking at the trunk. fot the two front seat it's a Torx40 you'll need to use on phase 2 but I think it's the same on phase 1, for the rear seats it's another problem

I know that metal guides/rails (below seats) are different in Ph1 and Ph2. In Polish Forum of Peugeot 405 i could buy a seat, or front/rear seats plus upholstery from doors (even from Mi16) but now all money i've got i invest in Mi16 (i want to register it as unique)

Darkraphy a écrit:You've done a lot of work on them ! Nice

Thanks, but a lot of is ahead

I'll be updating this topic in new pics


À bientôt!

Hi there and Welcome e2rd

Hi and welcome amongst us.

Hey, I took a look at the Polish 405 forum, it looks like it's working very well, I didn't expect so much Polish people to have a 405 , seems nice ... but I cant understand any word

Helo, yes it is but we don't have so many users and less of Mi16 as here.. We've got also only 2 T16 :P
When I bought my first 405 I didn't expect any forum, but it was and still is

About language.. I can't understand 95% of words in this forum in French I'm using an translator :P so I don't marvel to You

Of course with English I don't have this problem

BTW, on our forum is registered user nemesis45

À bientôt!

Welcome !

C'est la seconde fois que je vois un intérieur Mi16 US Rouge, c'est super beau !

Merci guigui405

J'ai une question.... où puis-je acheter en France et combien ça coûte Mi16 side skirts?

Isn't it as avaliable as here in Poland?

Yours!

By "Side Skirt", do you mean that :


It's called "bas de caisse" in french, but personnally, I can't help you, hope somebody else will help you

Bienvenue sur le forum !!

Darkraphy a écrit:By "Side Skirt" (...) It's called "bas de caisse" in french

Yes I mean that. And thank You Darkraphy for translate. It's helpful for me.


Helo monseaux

e2rd a écrit:

Darkraphy a écrit:By "Side Skirt" (...) It's called "bas de caisse" in french

Yes I mean that. And thank You Darkraphy for translate. It's helpful for me.


Helo monseaux

I'm happy to be able to help you, I'm don't know so much about car and particularly the 405, I'm learning as the problems happens and as other people's problem get solved in the forum, but if you need to translate some words I think I can help you

And for the side skirts, you sometimes can buy some on the forum, but not new ones, I don't know where you can find some new, maybe at Peugeot but for sure they will be expensive, were you looking for old ones or ?

Darkraphy a écrit:

e2rd a écrit:

Darkraphy a écrit:By "Side Skirt" (...) It's called "bas de caisse" in french

Yes I mean that. And thank You Darkraphy for translate. It's helpful for me.


Helo monseaux

I'm happy to be able to help you, I'm don't know so much about car and particularly the 405, I'm learning as the problems happens and as other people's problem get solved in the forum, but if you need to translate some words I think I can help you

And for the side skirts, you sometimes can buy some on the forum, but not new ones, I don't know where you can find some new, maybe at Peugeot but for sure they will be expensive, were you looking for old ones or ?

If I need a translation of course, I make themselves known to You BTW You're French or like me from another country?

Yes I know, I can buy some on the forum, but... for example.. on Polish forum of 405 cost of old/used side skirts is about... 200-300PLN (Polish Z³oty) (it's 50-70Euro) of course if somebody would like to sell it.. so how much it could cost here in French? I'm searching for old (lower price). Of coure that new at Peugeot will be expensive and probably too expensive for me (sluice-gate price)

First of all I'm searching it in Poland

I've got uncle who's working in transport company so from time to time he's driving to Newcastle in UK, but he's traveling by ferry from Dunkerque to Dover.. so I Don't count the cost of transport from France (of coure if somebody could take parts there or somwhere around there

No, I'm french

I don't know if you could find some cheaper in France but you should create a topic for that question in the right section

Ok so...

update of my work:

rear:
[Vous devez être inscrit et connecté pour voir ce lien]

Who will explain to me from where cooler from T16 here?
[Vous devez être inscrit et connecté pour voir ce lien]

The old beam:
[Vous devez être inscrit et connecté pour voir ce lien]

Interior:
[Vous devez être inscrit et connecté pour voir ce lien]

Rear bumper after painting:
[Vous devez être inscrit et connecté pour voir ce lien]

Front bumper after painting:
[Vous devez être inscrit et connecté pour voir ce lien]

So.. gentlemen, unless good out?

I must do:

- polishing
- white paint on the driver's door, I forgot...
- mount a front of car

And for the end...

- I can't move the driver's seat, if there is any way to move it (remove?) when the its electric isn't working?

Hello,
There is no link which works.

speed69 a écrit:Hello,
There is no link which works.

Hi!

Now it's working - my mistake in adding links..

Sympathetic is by shock pretty for you works.


Do I adort your interior you intend to remake leather?

speed69 a écrit:Sympathetic is by shock pretty for you works.


Do I adort your interior you intend to remake leather?

Hi!

Thank You Yes, of course I want to remake leather.

So... I've got some new pictures 'bout my Mi16, links below...


[Vous devez être inscrit et connecté pour voir ce lien]

It was polished by my friend and it's only a small part of photos..

Now I'm studying at the Polytechnic (like Yours "enseignement supérieure"?) so I don't have a lot of time for Mi16, but I must only mount the bumper beam, one halogen, wipers and chrome strips on bumpers.

And I still don't have "bas de caisse"

Pretty good job that you've done so far... i like it
As your interior, typical US... they love this color (Burgandy)-well, in the past- but i admit the color suit nicely with the seats.
Keep going Buddy! you will end-up with a very good/nice 405.

welcome here

Bonjour, après une longue pause !

Mise à jour de photos...

This is how it looks now:


These photos above aren't a final result - I still didn't buy a bas de caisse

- jaune dans Mi16, blanc dans GLD - Comparaison
- Côté éclairage

Below first try on (after that I've installed a plastic bumpers and metal bar under the bumper)
- Deux lions
- yellow effect


I still have a little problem with engine, his work is uneven... error codes: 12 (start) 33, 52, 41, 11 (stop)
33 is the absolute pressure sensor in the manifold (so MAF sensor is still broken or only I have to adjust it?)
52 - the ratio of air to fuel ratio beyond the scope of (air intake system is tight, but exhaust system is leaky - this is it?)
41 - sensor rpm/min / location (I have took out and cleaned the shaft position sensor, and it has a 507 Ohms so it's good..) or it's not a right sensor?


Thank You for help!

Qu'est ce qu'il est vilain ce pc arriere

laurent405grd93, You mean the side lighting? If yes, this is an US version. If no, explain it to me please.

i say mi 16's backbumper is bigger than european's backbumper , for the side lighting i know you should have this in US

Hi!

I searched the computer and I found a new previously unpublished photos
They're from time when I was fixing my Mi16.

So I uploaded 2 times in first galerry is about 50 photos, and in second.. 60...

[Vous devez être inscrit et connecté pour voir ce lien]

Enjoy!

I'm so sorry but welcome in this forum